Print the stacked Headband .stl file that best fits the working envelope of your 3D Printer.
A single file, 2x, 4x, 6x, 8x, and 10x files have been provided to increase print efficiency. Files located at the end of the instructions.
Print Material : Nylon, PETG, ABS, ASA are preferred over PLA as PLA is harder to sanitize and is less flexible.
Rogue is currently printing on multiple Markforged X7 with the below specs as a reference.
Onyx Material (Nylon with chopped Carbon Fiber)
0.250mm (Turbo) Layer Height
Triangular Infill, 37% density, 3 Roof & Floor Layers, 2 Wall Layers and a base brim for stability.
Carefully separate the parts and clean up any excess material.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.