Changes to this Step
Edit by Rogue Product Development —
Edit approved by Rogue Product Development
- Before
- After
- Unchanged
Step Lines
| [title] Disinfecting Fabric | |
| - | [* black] Wet the material with a cleaner or wipe containing an EPA-approved disinfectant. |
| - | [* icon_note] NOTE: Make sure the disinfectant does not contain alcohol, phenol, bleach, or ammonia. |
| - | [* black] Ensure the disinfectant stays on the fabric long enough to be effective per the cleaning manufacturer's instructions. |
| - | [* black] Allow it to dry completely before use. |
| + | [* black] Wet the fabric with an alcohol free, phenol free, bleach free, and ammonia free cleaner or wipe containing an EPA approved disinfectant. |
| + | [* icon_note] Rogue recommends using GymWipes Antibacterial as a cleaning agent. These are designed specifically for cleaning gym equipment. |
| + | [* black] Leave the disinfectant in place for the duration specified by the wipe manufacturer. |
| + | [* black] Please refer to the manufacturer’s instructions to determine the correct amount of time needed to leave the product on. |
| + | [* icon_note] If you are using GymWipes Antibacterial, leave the product on for at least 15 seconds. The solution will be the most effective if left on for at least 4 minutes. |
| + | [* black] After the appropriate amount of time has passed, wipe down with a clean cloth if not already dried. |