You're viewing a previously published revision of this guide.  View latest revision

Older
Nov 25, 2020 - 10:11:45
Feb 08, 2021 - 02:02:34 Feb 08, 2021 - 02:02:30 Jan 20, 2021 - 01:01:35 Jan 20, 2021 - 01:01:30 Jan 20, 2021 - 12:01:50 Jan 20, 2021 - 12:01:43 Jan 06, 2021 - 12:01:56 Jan 06, 2021 - 12:01:50 Jan 04, 2021 - 10:01:59 Dec 22, 2020 - 07:12:32 Dec 22, 2020 - 07:12:55 Dec 22, 2020 - 07:12:23 Dec 21, 2020 - 10:12:22 Dec 19, 2020 - 07:12:26 Dec 19, 2020 - 07:12:31 Dec 17, 2020 - 06:12:58 Dec 17, 2020 - 06:12:33 Dec 17, 2020 - 06:12:40 Dec 17, 2020 - 06:12:37 Nov 25, 2020 - 10:11:45 Nov 25, 2020 - 10:11:43 Nov 25, 2020 - 10:11:42 Nov 25, 2020 - 09:11:43 Nov 25, 2020 - 09:11:40 Nov 25, 2020 - 09:11:19 Nov 24, 2020 - 04:11:10 Nov 24, 2020 - 04:11:01 Nov 24, 2020 - 03:11:11 Nov 24, 2020 - 03:11:04 Nov 24, 2020 - 03:11:51 Nov 24, 2020 - 03:11:16 Nov 24, 2020 - 03:11:01 Nov 24, 2020 - 03:11:21 Nov 24, 2020 - 03:11:59 Nov 24, 2020 - 03:11:55 Nov 24, 2020 - 03:11:51 Nov 24, 2020 - 03:11:22 Nov 23, 2020 - 12:11:47 Nov 23, 2020 - 12:11:36 Nov 23, 2020 - 12:11:28 Nov 23, 2020 - 12:11:30 Nov 23, 2020 - 12:11:33
Newer

Plastic/Rubber Cleaning Guide

Written By: Rogue Product Development
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

Quiz

0

Introduction

The following guide demonstrates the recommended method for cleaning and disinfecting plastic and rubber parts.

  1. Clean with a solution of mild soap or detergent, using a cloth or paper towel. Wipe down with a clean cloth.

    • Clean with a solution of mild soap or detergent, using a cloth or paper towel.

    • Wipe down with a clean cloth.

  2. Wet the surface with a cleaner or wipe containing an EPA-approved disinfectant. NOTE: Make sure the disinfectant does not contain alcohol, phenol, bleach, or ammonia.

    • Wet the surface with a cleaner or wipe containing an EPA-approved disinfectant.

    • NOTE: Make sure the disinfectant does not contain alcohol, phenol, bleach, or ammonia.

    • Leave the disinfectant in place for the duration specified by the wipe manufacturer.

    • Wipe down with a clean cloth.

Author

Rogue Product Development

Member since: 3/26/20

2,955 Reputation

19 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 32

All Time: 1,758