Introduction
The following guide demonstrates the recommended method for cleaning barbells.
-
-
Remove any excess chalk with a nylon bristle brush.
-
-
-
Clean the shaft with a solution of mild soap or detergent using a cloth or paper towel.
-
NOTE: Do not allow the cleaning solution to enter the sleeves.
-
-
-
Dry the shaft with a clean cloth.
-
-
-
Wet the shaft with a cleaner or wipe containing an EPA approved disinfectant.
-
NOTE: Make sure the solution does not contain alcohol, phenol, bleach, and ammonia.
-
NOTE: Do not allow the disinfectant to enter the sleeves.
-
Leave the disinfectant in place for the duration specified by the wipe manufacturer.
-
-
-
Wipe the shaft down with a clean cloth.
-